O2 therapy Guides
A Direct-Replacement Heated Humidifier for Your Bubble CPAP Set: How We Match Any Configuration
Buyers send us configuration lists quoted on other brands and ask for a line-by-line equivalent at factory price. Here is how the matching works for the humidifier and the bubble CPAP set.
One of the most useful services we offer is also the simplest: buyers send us the configuration list they were quoted on another brand - line by line, with quantities - and we return a line-by-line equivalent quotation at factory pricing. This guide explains how that matching works for the humidifier and the bubble CPAP set, and the five points to check on any configuration before you sign.
Line 1: the heated humidifier - what to match
The humidifier line is where the engineering lives, so compare four numbers: heater-wire technology with servo control (not just a heater plate), dual temperature sensing at the chamber and the patient end, defined invasive and non-invasive modes with actual target temperatures, and the alarm set. Our PN-2000FB runs three heated-wire levels (typically 27, 32 and 37 degrees C) with dual temperature sensing; the FC850 adds a 10-70 degrees C range at plus or minus 0.3 degrees C accuracy with high and low humidity-temperature alarms.
Lines 2-5: the complete set around the humidifier
A complete bubble CPAP quotation continues with the air-oxygen blender (FiO2 21%-100%), the breathing circuits, the nasal interface kit - universal tubing, bonnets in two sizes, a sizing guide - and the nasal prongs in graduated sizes. Our configuration carries interface prongs in sizes 3020/3520/4030/4540/5050 plus horizontal prongs #0-#4, CPAP masks in small/medium/large, the bubble generator (3-10 cmH2O), and an oxygen analyzer to verify delivered FiO2 - every line matched with quantities to your patient mix.
The five checks before you sign
First, servo versus open-loop heating - ask for the temperature accuracy number. Second, dual temperature sensing at chamber and airway. Third, defined invasive and non-invasive modes with published target temperatures. Fourth, the alarm set - high temperature, low humidity, over-heat cutout. Fifth, whether the documentation pack (FSC, registration certificates, ISO 13485, authorization letter) comes with the offer or as extras.
The price conversation
Matching a configuration is not matching a price - it is matching engineering at a better price. Pigeon Medical prices its humidifiers at about 35% of comparable leading-brand systems because the factory produces over 90% of parts in-house at our 20,000 m2 facility. MOQ is 1 set, stock dispatch is fast, and every offer comes with FOB and DDP figures for your delivery city.
Frequently asked questions
Can you quote against another brand's configuration list?
Yes - send the list with quantities and we return the line-by-line equivalent with the documentation pack. This is a standard service for hospital-supply distributors.
Will the fittings match our existing circuits?
Send us your circuit and chamber types and we confirm compatibility before you order - the PN-2000 family uses standard 22 mm and 15 mm connections, and customization is available monthly.
Next step
Send your configuration list through the contact form on this site or via the email and phone listed on the Contact Us page, and the team at Pigeon Medical will return the line-by-line equivalent quotation with the documentation pack.
