Respiratory Humidifier
Respiratory Humidifier PN-2000FB
Heated-wire respiratory humidifier with servo control for infant CPAP and ventilation circuits, with invasive and non-invasive temperature modes.
Specifications
- Heater wire
- Yes, servo controlled
- Power rate
- 220VA
- Heated wire mode
- P1: 25-29 C, P2: 29-35 C, P3: 35-39 C
- Non-invasive mode
- Chamber outlet 31-36 C, airway 34 C ±2 C
- Invasive mode
- Chamber outlet 37-42 C, airway 40 C ±2 C
- Temperature sensor
- Double sensor
- Power source
- AC220V/110V, 50-60Hz
Heated-Wire Humidification With Servo Control
The PN-2000FB is a heated-wire respiratory humidifier with servo control and a double temperature sensor. In heated-wire mode it offers three settings: P1 at 25-29 C, P2 at 29-35 C and P3 at 35-39 C. Servo control regulates output against measured values instead of running open-loop, which keeps delivered gas stable as flows and room conditions change.
Invasive And Non-Invasive Temperature Targets
In non-invasive mode the chamber outlet runs at 31-36 C with airway temperature at 34 C plus or minus 2 C. In invasive mode the chamber outlet runs at 37-42 C with airway temperature at 40 C plus or minus 2 C. The unit is rated 220VA on AC220V/110V, 50-60Hz.
Ordering Guidance
The PN-2000FB is an optional humidifier across the Pigeon AD series CPAP (PN-2000F ships as standard). Pair it with the heated-wire circuits and temperature probes from the Pigeon accessories range - confirm your circuit type when ordering.
