Respiratory Humidifier
CPAP Humidifier Manufacturer in China - PN-2000F Entry Model with Auto-Feed Chamber
Entry CPAP humidifier for bubble CPAP sets - the PN-2000F heater-plate humidifier with stepless control (water 30-37 degrees C), 240 ml auto-feed chamber and 180 L/min peak flow. The standard humidifier of the AD series CPAP sets. Price-sensitive markets, MOQ 1 set, OEM logo.
Specifications
- Model
- PN-2000F / PN-2000FA entry humidifier
- Type
- Heater-plate humidification (no heated-wire circuits)
- Temperature control
- Stepless adjustment, water temperature 30-37 degrees C
- Plate temperature
- 45-75 degrees C (levels 1-6)
- Protection
- Automatic temperature control, overheat (dry-burn) protection
- Humidification chamber
- 240 ml (PN-2000F) auto-feed chamber with cover and overflow valve
- Maximum peak flow
- 180 L/min
- Maximum operating pressure
- 2 kPa
- Ports
- Inlet OD 22 mm (PN-2000F); outlet OD 22 mm
- Power
- AC 220V/110V, 50-60 Hz; power rate 150 W
- Display
- Digital temperature display, heater-on and power-on indicators
- Application
- Bubble CPAP sets, wards and clinics in price-sensitive programmes
1. FAQ
Q1: What is the PN-2000F, and how is it different from the FB and FC850?
The PN-2000F is the entry model of the Pigeon humidifier family: a heater-plate humidifier for bubble CPAP and positive-pressure systems. The plate heats the water (plate temperature 45-75 degrees C, stepless control with water temperature around 30-37 degrees C) and it uses the auto-feed chamber - but it does not support heated-wire circuits. If your circuits need wire heating, step up to the PN-2000FB (servo heated wire) or the PN-2000FC850 (servo, dual temperature modes). Same factory, same fittings, three price points.
Q2: Does the chamber auto-feed, and how full can it be?
The PN-2000F runs with an auto-feed chamber (240 ml, with cover and overflow valve) - water is replenished from a supply line without interrupting therapy, which is exactly what hospital tender lines specify. Fill to a maximum of 80% of the printed level; the overflow protection keeps the pump and circuit safe.
Q3: Why do price-sensitive markets choose this model?
Because it covers the complete humidification job of a bubble CPAP set at the lowest cost in the family: microcomputer-controlled heater plate, stepless adjustment with digital display, automatic temperature control with dry-burn protection, and disinfectable accessories. It is already supplied through distributors in price-sensitive markets across Africa and the Middle East - the entry model that opens NICU and ward programmes.
Q4: What warranty and certificates come with it?
Warranty is 12-24 months, confirmed in the quotation. The factory is ISO 13485 certified, and the document set for import and tender files (FSC, registration certificates, authorization letter) is prepared on request. Catalog PDF available via the contact form or WhatsApp.
Q5: Is it the same humidifier used in the AD series bubble CPAP sets?
Yes - the PN-2000F is the standard humidifier of the AD series bubble CPAP configuration (the FC850 is the upgrade option). Ordering the AD-I or AD-1A set with the PN-2000F keeps the whole set on one datasheet from one factory.
Do you supply 'Neonatal CPAP Humidification' consumables for hospital tenders, 30 per box?
Yes - neonatal CPAP humidification is the consumable side of this humidifier, and we pack it to match your tender: the auto-feed chamber, heated-wire or standard breathing circuits, nasal interfaces, masks and bonnets are quoted as consumable lines, with box counts customized to the tender requirement (for example 30 per box). These consumables run with the PN-2000F humidifier on this page - and with the PN-2000FB and FC850 upgrades - so one supplier covers the humidifier and every humidification line that follows it. Documentation pack (ISO 13485, FSC, registrations) included for your bid.
Which humidifier should I choose - adult or neonatal humidification?
A quick family guide: the PN-2000F is the entry humidifier for neonatal CPAP humidification - budget programmes and price-sensitive wards. The PN-2000FB adds heated-wire servo control and covers adult high-flow humidification with the PN-2000HF80. The PN-2000FC850 adds dual invasive/non-invasive modes with dual temperature sensing - the choice for combined adult and neonatal units. All three share fittings and one factory.
2. Why Partner with Pigeon Medical?
2.1 Stepless Heater Control with Digital Display
The heater plate is stepless-adjustable (levels 0-6, plate 45-75 degrees C) holding the water at around 30-37 degrees C, with real-time digital temperature monitoring - automatic temperature control with dry-burn protection.
2.2 Auto-Feed Chamber, 180 L/min Peak Flow
The 240 ml auto-feed humidification chamber keeps water topped up without therapy disruption, handles peak flows up to 180 L/min, and carries cover and overflow valve - matching hospital tender lines for neonatal CPAP humidification.
2.3 The Standard Humidifier of the AD Series Sets
The PN-2000F is the standard humidifier specified in the AD series bubble CPAP configuration - one datasheet with the CPAP device, blender and compressor, so the whole set is documented by one factory.
2.4 OEM with Your Logo
MOQ 1 set, monthly OEM/ODM with your logo, and packing customized to your tender requirement.
3. Technical Specifications
See the specification table - values are 1:1 from the PN-2000F catalog (2025 edition). The catalog PDF is available on request via the contact form or WhatsApp.