Sep 15, 2026Assemblying/installment
How to Install a Bubble CPAP System
1.Bubble CPAP installation guide 2.which accessories are included with one Bubble CPAP unit? Air oxygen blender+bubbler/bubble pressure generator+humidifier with water chamber +breath circuit
below are installment of Pigeon ’s Bubble CPAP#AD-VI with blender AD3000-SPDF
一SPECIFICATION OF INFANT CPAP AD-I
The CPAP continuous positive airway pressure system AD-I is a pediatric respiratory support medical device designed based on the wide application of non-invasive continuous positive airway pressure in the pediatric field. It is designed for premature infants, newborns, infants and children. It is used for nasal congestion CPAP ventilation treatment. CPAP mode keeps children breathing spontaneously, and can effectively reduce children's work of breathing.
Air Oxygen Blender
CPAP Mode: Bubble CPAP
Air Flow Regulation: 0L/min-15L/min
Oxygen Flow Regulation: 0L/min-15L/min
Oxygen Concentration Regulation: 21%-100%
Working Noise: ≤55dB(A)
Gas Input: Medical Oxygen 0.3MPa-0.4MPa
Medical Humidifier
Power Input: a.c.220V,50Hz, 110V,50~60Hz
Heater Plate: 150W
Thermal Cut Off: 95±6℃
Display：Three digital, 0.56 inch，7 segment LED
Temperature Monitoring: 0-75℃
Heating Range: 0-70℃
Medical Air Compressor
Power Input: a.c.220V,50Hz, 110V,50~60Hz
Output Pressure: 0.012MPa ~ 0.018MPa (Upgraded model: 0.06MPa)
Output Flow: ≥10L/min(Upgraded model: ≥12L/min)
Noise: ≤ 55dB(A)
Bubble CPAP Generator
CPAP Regulation:300Pa-1000Pa (3cmH2O-10cmH2O)
Made of PC material.
Reusable and unbreakable with overflow protection.
The overflow container, cover and fill funnel can be easily removed for cleaning and disinfection without disturbing CPAP